Whether
it is a commercial housing or a personal property, the contribution of steel
pipes has been inevitable. This is primarily because a steel pipe is used in several ways and is a durable unit. However,
as every valuables need to be maintained properly for better functioning, these
pipes should be cleaned as well at regular intervals. Well, cleaning the steel
pipes generally involves three parts process. You will first require to clean
the pipe’s inside and then outside. As soon as you are done with this, now
polish for a shining finish. There are other different ways for cleaning these
pipes. Select the method, which works the best for your needs. In case that
process doesn’t work, simply change to the next one.
Cleaning the interior
·
At first, pass water through
the pipe. However if the unit is small enough, this can be done by putting it
in a sink. Also, make use of a hose if the steel pipe is too large to get fit in a sink.
·
Twist the unit. When the water
is running, just make sure to tilt it so that the liquid runs against the
pipe’s interior. Then twist the pipe so that the water is able to clean off the
unit.
·
Now use a cleaning scrub brush,
which is saturated with liquid soap for scrubbing the inside of the unit. Well,
you can also consider using a quality baby bottle brush for cleaning, if the
pipe is very narrow.
·
Now rinse the steel pipe with completely clean water
and then leave it to dry.
Cleaning the exterior
·
Saturate a cotton cloth with
white vinegar and then wipe the unit’s exterior. Rinse the pipe’s outside with
warm soapy water.
Polish the pipe
·
You can apply a very little
amount of metal polish to a rag
·
Then rub the rag across the
pipe’s surface in order to distribute the polish.
·
After polishing the steel pipe allow it to dry
A few more tips:
Make
sure to follow all the guidelines. Also, while making use of metal polish it is
suggested to wear rubber gloves.
No comments:
Post a Comment